How to Replace a Broken Espresso Maker Handle Safely

By Herzlich Willkommen bei Westmark | Published: 2026-11-02

Category: How-to Guides

A broken handle on your stovetop espresso maker doesn't mean a new pot. Follow these safe steps to fit a replacement handle and get brewing again.

Quick answer

Replace the handle only if you can source an exact-match part for your model—such as the Westmark replacement handle for art.-no. 24602260. Otherwise, retire the pot; a loose or improvised handle is a burn risk.

Why an exact-match handle matters more than a tight fit

Stovetop espresso makers get hot enough to burn through gloves, so the handle is a safety component, not a cosmetic one. A handle that fits loosely can rotate under load, and one that is too tight can crack the mounting point. The only reliable way to avoid both is to use a handle specified for your exact model number. If you cannot find that number, do not substitute a handle from another pot—even if it looks similar.

When replacement is not the right call

Skip the repair if the mounting hole on the pot is deformed, cracked, or stripped. A new handle will not fix a damaged attachment point and may fail under a full pot. Also check the pot body for other damage: a warped base or a failing gasket means the pot is due for replacement, not just a new handle.

Step-by-step handle replacement

Let the pot cool completely: Wait until the espresso maker is fully cool to the touch before you start. Common mistake: handling a warm pot—metal retains heat and can burn you even after brewing. Cooling also prevents thermal shock if you run the pot under water later.
Remove the old handle: Unscrew the mounting screw or bolt that holds the handle. If it is stuck, apply a penetrating oil and let it sit; do not force it and risk stripping the screw head. Keep the screw and any washers—you may need them for the new handle.
Inspect the mounting point: Check the hole and surrounding metal for cracks, deformation, or stripped threads. If any of these are present, stop and replace the pot instead of the handle. A clean, undamaged mounting point is the checkpoint for proceeding.
Fit the new handle: Align the replacement handle with the mounting hole and insert the screw. Hand-tighten until snug—do not overtighten, as this can crack the handle or damage the pot. The handle should feel firm with no wobble; if it moves, check alignment before tightening further.
Test before brewing: Fill the pot with water only and brew as usual. Hold the handle with a dry cloth and check for stability. If the handle shifts or feels loose, stop and reassemble. A water-only test catches problems without wasting coffee or risking a spill.

Product facts

Replacement handle for espresso maker art.-no. 24602260: This replacement handle is designed for Westmark espresso makers, specifically matching art.-no. 24602260. Using the model-specific handle ensures a proper fit and avoids the safety risks of a loose or forced fit.
Replacement handle for espresso maker art.-no. 24602260