Uneven fries usually point to the blade, not your potatoes
If your Westmark potato chipper 1180 starts producing fries that are ragged on one side, crushed at the edges, or inconsistent in thickness, the cutting blade is the first thing to check. The chipper relies on a sharp, correctly sized knife to push potatoes through cleanly; when that edge dulls, the same potato can come out uneven.
This guide helps you diagnose whether a worn knife is the likely cause and confirm the right replacement part. It does not cover disassembly or sharpening procedures, because the supplied catalog information for this spare part does not include those steps.
Signs your 1180 chipper knife may need replacing
These are practical observations, not a manufacturer checklist. Use them to decide whether inspecting or replacing the knife is worth your time.
- Fries tear or crush instead of cutting cleanly: A dull edge can bruise the potato rather than slice through it, leaving soft, broken pieces.
- Thickness varies from fry to fry: The 12 x 12 mm blade is designed for uniform cuts. If your fries no longer come out consistently, the blade may be worn or damaged.
- You have to force the lever or press harder: Increased resistance can indicate a dull blade, though it can also come from potato variety or size. Check the blade before assuming the chipper is broken.
- Visible nicks, rust, or a rounded edge: Inspect the blade directly. Any physical damage or heavy wear is a strong reason to replace it.
The replacement part that matches the 1180
- Spare knife, 12 x 12 mm for potato chipper 1180: Replacement knife for Westmark potato chipper model 1180; blade size 12 x 12 mm. Model and size are the two details that determine whether a spare knife will fit and cut as intended. This part is listed specifically for the 1180.

Spare knife, 12 x 12 mm for potato chipper 1180 - Spare knife, 12 x 12 mm for potato chipper 1180: Genuine Westmark spare part designed as a direct replacement. A direct replacement reduces the risk of fit issues compared with a generic blade, and it is the part the catalog identifies for this chipper.
Why the 12 x 12 mm size matters
The 12 x 12 mm measurement refers to the blade's cutting size, which determines the cross-section of your fries. If you order a blade with a different size, you will get a different cut, and it may not fit the 1180 at all. Before ordering, confirm that your chipper is the 1180 model and that you want 12 x 12 mm fries.
The catalog does not list other blade sizes for this chipper, so if you need a different cut, check the full range separately rather than assuming this part will produce it.
How to confirm the spare knife is the right fix
Work through these checks before spending money on a replacement. They help separate a blade problem from other causes of uneven fries.
- Check the model number: Look for 1180 on your chipper or its packaging. This spare knife is listed for that model only.
- Inspect the current blade: Remove it only if your chipper's instructions allow it. Look for nicks, rust, or a rounded edge. The supplied information does not include removal steps, so consult your chipper's documentation first.
- Test with a consistent potato: Try a few potatoes of similar size and variety. If the cut is still uneven, the blade is the likely culprit.
- Order the 12 x 12 mm spare: If the signs point to wear, the Westmark spare knife for the 1180 is the part the catalog identifies as the direct replacement.
What the catalog does not confirm
The supplied information for this spare knife does not include installation instructions, sharpening guidance, care instructions, or a stated lifespan. It also does not confirm compatibility with any chipper other than the 1180. If you need those details, check the chipper's manual or contact Westmark directly rather than guessing.
Replacing the knife is a straightforward way to restore consistent cutting, but it is not a fix for every problem. If fries are still uneven after a new blade, the issue may lie elsewhere in the chipper or in how the potatoes are prepared.

